Modifying A Vlan - Extreme Networks EPICenter Software Installation Manual

Using the VLAN Manager
Figure 166: The Delete VLAN page
2 Select the VLAN you want to delete.
3 Click Delete.
The VLAN is deleted from all the switches on which it exists.
4 Click Close to exit the window.
If any of the switches are offline or unreachable, the VLAN remains with only those switches as a
member.

Modifying a VLAN

Users with Administrator or Manager access can modify the properties of a VLAN, and add and
remove ports from the VLAN. If you have only Monitor access, you can not use this function.
You can start the Modify VLAN process in two ways:
• Click the Modify icon in the VLAN Manager toolbar.
Using this method you can modify both the VLAN membership (devices and ports) and properties
(tag and protocol filter) and modify the IP Forwarding behavior. You can also search for device
connections between devices in the VLAN.
If you select a VLAN before you click the Modify button, the Modify VLAN window will contain
information on the VLAN you selected. If you do not select a VLAN beforehand, you can select one
from within the Modify VLAN window.
See "Modifying a VLAN from the Toolbar" on page 335 for details.
334 EPICenter Software Installation and User Guide