Table of Contents
Advertisement
Track Panner
3.1
Enhanced Pass
3.1
Control Show
System
Euphonix CS3000/2000 MixView 3.2 Software Supplement
The Euphonix TrackPanner I/O module, allows you to set the relative positions
of audio objects within the surround soundstage in a very natural manner
using a trackball-style panning interface.
Before the TrackPanner can be used, it must be activated. To activate the
TrackPanner, press the QWERTY keyboard [F10] key and select the Film pan
control field using the SpinKnob:
Press the DSC [F4] toggle key until the Trackball interface option appears in
the field followed by the [Enter] key.
The two keys located on either side of the TrackPanner are now active.
Pressing the left key is the TrackPanner attention key and brings up the
TrackPanner menu:
OFF
Pan
F1
F2
The key to the right of the TrackPanner is your Pan/Surround Punch key. Press
the [F1] (OFF) key to activate the TrackPanner. [F2] (Pan) and [F3] (Srnd) lock
their respective parameter movements so precise pans can be made either
front-to-back or side-to-side. For right-handed operation, the functions of the
two TrackPanner keys can be swapped by pressing [F4] (A-P). The Punch key
will then appear as the left button and F4 is renamed (P-A).
When selecting DSC EQ, Auxes or Pan Assign modes, the Pass Control screen
changes automatically to show either EQs, Auxes or Panners in the Automa-
tion Viewer portion of the display, depending on what DSC mode you are in:
Aux 1-4
Section 2: Monitoring Enhancements
TrackPanner Menu
Srnd
A-P
F3
F4
1 - 23
Advertisement
Table of Contents
