Pan; Pan Knobsets - Euphonix System 5B Operation Manual

System 5-B Digital Audio Mixing System Operation Manual
8.3.5

Pan

System 5-B is not limited to a single pan format and one pan control per channel im-
posed by the traditional analog console. System 5-B allows the following pan formats
(also called pan laws): mono, stereo, LCR, LCRS, 5.1, 6.1, and 7.1.
A single panner can control several different Main or Group busses at once, each with dif-
ferent formats. See Section 7.3 - Main and Group Bus Setup to learn how to assign Main
and Group Bus formats.

Pan Knobsets

Press the Pan function key to assign the Pan parameters to the knobset (Figure 8-13).
See Section 8.5.1 - Group Bus Routing and/or Section 8.5.2 - Main Bus Routing to re-
view how to use the Pan to: switch to insert Pan.
Pan (page 1)
Rot8
on/off
FocF
on/off
DivF
on/off
NonB
in/out
Boom
in/out
PanR
in/out
Srnd
in/out
PanF
Width
in/out
cfg
Pan (page 2)
Rotate
Focus
(Front)
Divergence
(Front)
Non-Boom
Level
DivS
Boom Level
in/out
FocS
Pan Rear
in/out
DivR
Surround Pan
in/out
FocR
Pan Front
in/out
cfg
Page keys display
other Pan pages
Figure 8-13 Pan Knobsets
Pan (page 3)
LTM
RTM
Divergence
in/out
(Surround)
Focus
in/out
(Surround)
Divergence
in/out
(Rear)
Focus
in/out
(Rear)
111
Channels and Strips
Bal
Balance
(Stereo MF Only)
WidF
Width
(MF Only)
PanR
Pan Rear
Srnd
Surround Pan
PanF
Pan Front
cfg