Pan Bus Masters - Euphonix MixView CS3000 Software Manual

Section 4: The Audio Cube
Aux Copy

Pan Bus Masters

i d t i d t i d t
i d t i d t i d t
i d t i d t i d t
i d t i d t i d t
i d t i d t i d t
i d t i d t i d t
i d t i d t i d t
Bus Kill
Bus Iso
4 - 30
Copy is done from the top level Cube Aux menu. Select the Cube aux send set
you wish to copy then press F1. Press fader attention keys to copy all aux level
and status to subsequent faders.
The last subject of this section covers the pan bus master controls. Press Pan
Assign and Bus Master DSC keys.
i d t
i d t
i d t
i d t
i d t
i d t
i d t
In addition to the SmartDisplay menus, you will see the red pan bus master
controls in the screen display.
As with aux bus masters, these controls are mapped to the DSC Rotary Control
Set, have dB display and can be named.
The Bus Kill switch works as described for aux bus masters in that it mutes all
bus masters. The buses are then individually unmuted.
Bus Iso acts to isolate all pan bus masters from SnapShot recall.
Hyper Surround Panners will need be created before pan buses are fully
utilized. The next section is dedicated to Hyper Surround and will lead you
through the process of building panners.
Euphonix CS3000/2000 MixView 3.0 Software Supplement