Rigol DS6000 Series User Manual page 218

RIGOL
5) Press OK to execute the saving operation.
2. Load the specified type of file in the external USB storage device.
1) Press SAVE  Storage to select "Traces" and then press Load to turn on
the interface as shown in Figure h. Use
down
2) As shown in Figure i, use
Load to load the selected file.
12-8
to open the USB storage device (Figure i).
to select "Disk E" and press
to select the desired file to load and then press
12 Store and Recall
Figure g
Figure h
Figure i
DS6000 User's Guide