Protocol Decoding - Rigol DS6000 Series User Manual

7 Protocol Decoding

7 Protocol Decoding
Protocol analysis can be used by users to discover errors, debug hardware and
accelerate development, so as to guarantee quick and high-quality accomplishment
of projects. Protocol decoding is the basis of protocol analysis. Only protocol analyses
with correct protocol decoding are acceptable and only correct protocol decoding can
provide more error information. DS6000 provides two buses to make common
protocol decoding (including: Parallel (standard), RS232 (option), SPI (option), I2C
(option), CAN (option) and FlexRay (option)) of the analog channels (CH1-CH4).
Because the decoding functions and setting method of the two buses are the same,
this chapter only takes BUS1 for illustration.
To get the decoding option information, please refer to "Appendix A: Options and
Accessories" on page 17-1.
When you have ordered the decoding option, please refer to "Option
Management" on page 13-17 to activate the corresponding option.
The contents of this chapter:
Parallel Decoding

RS232 Decoding (Option)

I2C Decoding (Option)

SPI Decoding (Option)

CAN Decoding (Option)

FlexRay Decoding (Option)

DS6000 User's Guide
RIGOL
7-1