Rigol DS6000 Series User Manual page 194

RIGOL
Waveform Recording
Waveforms from all the channels currently turned on will be recorded during
waveform recording.
Press UTIL  Record  Mode and use
waveform recording operation menu on.
1. End Frame
Press End Frame and use
recorded. The number of frames available is related to the memory depth
currently selected.
2. Recording Operation
Waveform recoding can be realized via the shortcut buttons in the menu or at
the front panel.
Menu
Press Operate and
select "●" to start
recoding.
When the recording is
finished, "●" changes
to "■" automatically.
You can also select "■"
manually.
10-2
Navigation Knob (Playback)
UTIL
Play/Pause (Playback)
Stop Recording/Playback
Record (Record)
to select "Record" to turn the
to set the desired number of frames to be
Front Panel
Press , the backlight goes on (in red) and starts
to flash, which indicates that the recording is
started.
When the recoding is finished,
automatically and the backlight of
orange). You can also press
10 Waveform Recording
goes off
goes on (in
directly.
DS6000 User's Guide