Rigol DS6000 Series User Manual page 253

13 System Function Setting
7. Quality
Press this softkey to select the print quality. You can select Default, Normal,
Draft or Fine.
Note: the selection is unavailable when the printer does not support this
function.
8. Date
Press this softkey to turn the date print on or off.
Note: this attribute is the built-in attribute of the PictBridge printer. This menu is
invalid when the printer connected does not support this attribute.
9. Invert
Press this softkey to turn the invert print on or off.
10. Copies
Press this softkey and use
1 to 999.
11. Header
Press this softkey to set the header in print.
12. Footer
Press this softkey to set the footer in print.
13. Print
After setting the print parameters, press this softkey or press the
key at the front panel directly to execute the print operation.
14. Terminate
As the PictBridge printer is the master device, you need to terminate the print
via the oscilloscope by pressing Terminate.
Note: this menu is only displayed during the print.
DS6000 User's Guide
to set the copies to be printed. The range is from
RIGOL
shortcut
13-21