Internal Store And Recall - Rigol DS6000 Series User Manual

12 Store and Recall

Internal Store and Recall

Internal store and recall support "Traces", "Waveforms" and "Setups" in Storage. In
the following part, "Traces" are taken as an example for illustration.
1. Save the specified type of file in internal memory.
1) Connect the signal to the oscilloscope and obtain stable display.
2) Press SAVE  Storage to select "Traces" and press Save to turn on the
interface as shown in Figure a. use
to turn on the local disk (Figure b).
3) As shown in Figure b, the local disk can at most store 10 trace files. Use
to select the desired storage position, Save is illuminated and then press the
key to execute the saving operation. If the current position contains a file,
the original file can be overwritten or be delected by pressing Delete. Use
to select
directory.
Note: in internal storage, New File and New Folder are not available.
DS6000 User's Guide
to select " Local Disk" and press
and then press down
Figure a
to return to the previous
Figure b
RIGOL
12-5