Rigol DS6000 Series User Manual page 133

6 To Make Measurements
Press MATH  Operate to select "Logic":
Press Expression to select the desired operation expression and the default is

AND.
Press Source A and Source B to select the desired channels. The channels

available are CH1, CH2, CH3 and CH4.
Press Invert to turn the invert display of the operation results on or off.

VERTICAL

POSITION and HORIZONTAL
display of the operation results.
Press Threshold A and use

operation.
Press Threshold B and use

operation.
DS6000 User's Guide
POSITION, VERTICAL
to set the threshold of source A in logic
to set the threshold of source B in logic
SCALE, HORIZONTAL
SCALE can also be used to adjust the
RIGOL
6-9