RIGOL
10. Trigger Source
Display the trigger source currently selected (CH1-CH4, EXT, EXT/5 or AC
Line). Different labels are displayed when different trigger sources are
selected and the color of the trigger parameter area will change accordingly.
For example,
11. Trigger Level
at the right of the screen is the trigger level label and the trigger
level value is displayed at the upper-right corner of the screen.
When Using TRIGGER
trigger level value will change with the up and down of
Note: in slope trigger, there are two trigger level labels (
detailed information, please refer to the introduction in "Vertical Window"
on page 5-12.
12. CH1 Vertical Scale
Display the voltage value per grid of CH1 waveform vertically.
Use VIRTICAL
The following labels will be provided according to the current channel
setting: "Channel Coupling" (such as
"Bandwidth Limit" (such as
"Input Impedance" (such as
13. CH2 Vertical Scale
Display the voltage value per grid of CH2 waveform vertically.
Use VIRTICAL
The following labels will be provided according to the current channel
setting: "Channel Coupling" (such as
"Bandwidth Limit" (such as
"Input Impedance" (such as
14. CH3 Vertical Scale
Display the voltage value per grid of CH3 waveform vertically.
Use VIRTICAL
The following labels will be provided according to the current channel
setting: "Channel Coupling" (such as
"Bandwidth Limit" (such as
1-26
denotes that CH1 is selected as the trigger source.
LEVEL to modify the trigger level, the
SCALE to modify this parameter.
SCALE to modify this parameter.
SCALE to modify this parameter.
in AC coupling),
when bandwidth limit is enabled) and
when the input impedance is 50 Ω).
in AC coupling),
when bandwidth limit is enabled) and
when the input impedance is 50 Ω).
in AC coupling),
when bandwidth limit is enabled) and
1 Quick Start
.
and
). For
DS6000 User's Guide