Knob; Navigation Knob - Rigol DS6000 Series User Manual

1 Quick Start

Knob

Navigation Knob

For example, this knob can be used to quickly locate the waveform frame ("Current
Frame" menu) to be played back in the waveform playback function. Similar menus
include trigger holdoff, pulse width setting, slope time etc.
DS6000 User's Guide
Adjust waveform brightness:
In non-menu-operation mode (menu is hidden), turn this
knob to adjust the brightness of waveform display. The
adjustable range of the brightness is from 0% to 100%.
Turn clockwise to increase the brightness and
counterclockwise to reduce. Press down this knob to
reset the brightness to 50%.
You can also press DISP  WaveIntensity and use
the knob to adjust the waveform brightness.
Multifunctional Knob (the backlight goes on
during operation):
In menu operation, press some menu softkey and turn
the knob to select the submenus under this menu and
then press down the knob to select the currently selected
submenu. It can also be used to modify parameters and
filename input.
This knob provides quick Adjust/Locate function
for numerical parameters with relatively large
settable range. Turn clockwise
(counter-clockwise) to increase (reduce) the
value. Note that the inner knob is used for fine
adjustment and the outer knob for coarse
adjustment. The change rate of the value
depends on the rotation amplitude of the outer
knob.
RIGOL
1-21