Trigger; Run/Stop - Rigol DS6000 Series User Manual

1 Quick Start

TRIGGER

Run/Stop

DS6000 User's Guide
MODE: press this key to switch the trigger mode to Auto,
Normal or Single and the corresponding state backlight
of the current trigger mode would be illuminated.
TRIGGER LEVEL: modify the trigger level. Turn
clockwise to increase the level and turn counterclockwise
to reduce the level. During the modification, the trigger
level line moves up and down and the value in the trigger
level message box (e.g.
lower-left corner of the screen changes accordingly. Press
down the knob to quickly reset the trigger level to zero
point.
MENU: press this key to turn on the trigger operation
menu. This oscilloscope provides various trigger types.
FORCE: in Normal and Single trigger modes, press this
key to generate a trigger signal forcefully.
50%: press this key to set the trigger level to the vertical
midpoint of the trigger signal amplitude.
Press this key to set the state of the oscilloscope to "Run"
or "Stop". In "Run" state, the key is illuminated in yellow
and red in "Stop" state.
RIGOL
) at the
1-19