Division - Rigol DS6000 Series User Manual

RIGOL

Division

Divide the waveform voltage values of signal source A by B point by point and display
the results. It can be used to analyze the multiple relationships of waveforms in two
channels. Note that when the voltage value of channel B is 0, the result of the
division is treated as 0.
Press MATH  Operate to select "A ÷ B":
Press Source A and Source B to select the desired channels. The channels

available are CH1, CH2, CH3 and CH4.
Press Invert to turn the invert display of the operation results on or off.

VERTICAL

POSITION and HORIZONTAL
display of the operation results.
6-4
POSITION, VERTICAL SCALE, HORIZONTAL
SCALE can also be used to adjust the
6 To Make Measurements
DS6000 User's Guide