Rigol DS6000 Series User Manual page 136

RIGOL
"Mantissa". The steps available are × 1, × 0.1, × 0.01, × 0.001 and ×
0.0001.
Mantissa: press this softkey to set the valid number of digits of the

variable. After setting the "Step" or pressing this softkey, turn the knob to
modify this parameter. The range available is from -9.9999 to 9.9999.
Exponent: press this softkey to set the numeric values of the exponents

with 10 as the base in the variables. The range is from -9 to 9.
For example, the following setting means set Variable1 to 6.1074×10
Variable: Variable1
Mantissa: 6.1074
Exponent: 8
5. Operator
Please refer to the following table to get the functions of each operator.
Table 6-4 Operator
Operator
+ - * /
( )
< > <= >=
== !=
!( || &&
Note: in division operation, when the divisor is 0, the result of the division is
treated as 0.
6. Figure
Select from figure 0 to 9, decimal point and character E. Where, character E is
used to refer to the n
6-12
Function
Arithmetic operators: add, subtract, multiply and divide
Parentheses: used to increase the priority of the operation
enclosed in the parentheses
Relationship operators: lower than, greater than, lower
than or equal to, greater than or equal to, equal to, not
equal to
Logic operator: NOT, OR, AND
th
power of 10. For example, 1.5E3 means 1.5×10
6 To Make Measurements
8
.
3
.
DS6000 User's Guide