To Select The Display Type - Rigol DS6000 Series User Manual

RIGOL

To Select the Display Type

Press DISP  Type to set the waveform display mode to "Vectors" or "Dots".
Vectors: the sample points are connected using lines and displayed. Normally,

this mode can provide the most vivid waveform to view the steep edge of the
waveform (e.g. square waveform).
Dots: display the sample points directly. You can directly view each sample point

and use the cursor to measure the X and Y values of the sample point.
11-2
DISP
11 Display Control
DS6000 User's Guide