6 To Make Measurements
Subtraction
Subtract the waveform voltage values of signal source B from A point by point and
display the results.
Press MATH Operate to select "A-B":
Press Source A and Source B to select the desired channels. The channels
available are CH1, CH2, CH3 and CH4.
Press Invert to turn the invert display of the operation results on or off.
VERTICAL
POSITION and HORIZONTAL
display of the operation results.
Multiplication
Multiply the waveform voltage values of signal source A and B point by point and
display the results.
Press MATH Operate to select "A x B":
Press Source A and Source B to select the desired channels. The channels
available are CH1, CH2, CH3 and CH4.
Press Invert to turn the invert display of the operation results on or off.
VERTICAL
POSITION and HORIZONTAL
display of the operation results.
DS6000 User's Guide
POSITION, VERTICAL
POSITION, VERTICAL
SCALE, HORIZONTAL
SCALE can also be used to adjust the
SCALE, HORIZONTAL
SCALE can also be used to adjust the
RIGOL
6-3