Storage Type - Rigol DS6000 Series User Manual

12 Store and Recall

Storage Type

Press SAVE  Storage to select the desired storage type. The default is "Traces".
The store and recall descriptions of each type are as follows.
1. Traces
Save the waveform data in internal or external memory in "*.trc" format. At
most 10 trace files (from LocalTrace0.trc to LocalTrace9.trc) can be stored in the
internal memory. The data of all the channels turned on can be saved in the
same file. At recall, the data will be displayed on the screen directly.
2. Waveforms
Save the waveform data in internal or external memory in "*.wfm" format. At
most 10 waveform files (from LocalWfm0.wfm to LocalWfm9.wfm) can be
stored in internal memory. The stored files contain the waveform data of the
four analog channels and the main setting information of the oscilloscope and all
the data can be recalled.
3. Setups
Save the settings of the oscilloscope in internal or external memory in "*.stp"
format. At most 10 setting files (from LocalSetup0.stp to LocalSetup9.stp) can
be stored in internal memory. The stored settings can be recalled.
4. Picture
Save the screen image in external memory in "*.bmp", "*.png", "*.jpeg" or "tiff"
format. You can specify the file name and saving directory and save the
corresponding parameter file (*.txt) under the same directory using the same
file name. The recall of image and reference files is not supported.
After seleting this type:
Press PicType to select the desired storage format.
Press Para.Save to enable or disable the parameter save function.
DS6000 User's Guide
RIGOL
12-3