Rigol DS6000 Series User Manual page 271

16 Specifications
USB Trigger
Signal Speed
Trigger condition
Measure
Cursor
Auto Measurement
Number of
Measurements
Measurement Range
Measurement Statistic
Frequency Counter
DS6000 User's Guide
Low Speed, Full Speed
SOP, EOP, RC, Suspended, Exit Suspended
Voltage Deviation between Cursors (△V)
Manual
Reciprocal of △T (Hz) (1/△T)
Time Deviation between Cursors (△T)
Mode
Track Mode Voltage and Time Values of the Waveform
Point
Auto Mode Allow to display cursors during auto
measurement
Measurements of Maximum, Minimum, Peak-Peak Value,
Top Value, Bottom Value, Amplitude, Average, Mean
Square Root, Overshoot, Pre-shoot, Area, Period Area,
Frequency, Period, Rise Time, Fall Time, Positive Pulse
Width, Negative Pulse Width, Positive Duty Cycle,
Negative Duty Cycle, Delay AB , Delay AB , Phase
AB , Phase AB
Display 5 measurements at the same time.
Screen or cursor
Average, Max, Min, Standard Deviation, Number of
Measurements
Hardware 6 bits frequency counter
(channels available: DS606x, CH1/CH2; DS610x,
CH1/CH2/CH3/CH4)
RIGOL
16-5