Meas; Clear; Print - Rigol DS6000 Series User Manual

1 Quick Start

MEAS

Press this key to enter the measurement menu which supports
measurement parameter setting, all measure, statistic analysis and
counter. Press MENU at the left of the screen to quickly turn on the
selecting menu of the 24 measurement parameters and easily
realize "one-key" measurement of common parameters.

Clear

Press this key to clear all the waveforms on the screen. If the
oscilloscope is in "Run" state, new waveforms will still be displayed.

Print

Press this key to execute print function or save the screen in the
USB storage device. If the oscilloscope is currently connected to a
printer (PictBridge or normal) and the printer is in idle state, press
this key to execute print function. If no printer but an USB storage
device is currently connected, press this key to save the screen to
the USB storage device in ".bmp" format (if the current storage
type is picture, the screen will be saved in the USB storage device
in the specified picture format). When printer and USB storage
device are connected at the same time, the printer enjoys higher
priority.
DS6000 User's Guide
RIGOL
1-23