Hitachi XP P9500 User Manual page 613

Functional Differences Between Version 7.2 and Versions
Earlier Than 7.2
• When creating an initial RAM disk image file in Red Hat Enterprise Linux
6, the dracut command is now used, instead of the dlmmkinitrd boot
disk support utility.
Due to this change, the dlmmkinitrd utility is no longer installed in a Red
Hat Enterprise Linux 6 environment.
Functional Differences Between Version 6.2.1 and Versions
Earlier Than 6.2.1
• The output destination of the HDLM command operation log data has
been changed from Hitachi Network Objectplaza Trace Library (HNTRLib2)
integrated trace information files (/var/opt/hitachi/HNTRLib2/spool/
hntr2n.log
information files (/var/opt/DynamicLinkManager/log/dlnkmgrn.log
# n indicates a file number.
Functional Differences Between Version 6.1 and Versions
Earlier Than 6.1
• In a new installation of HDLM, the default load balancing algorithm has
been changed from the Round Robin algorithm to the Extended Least I/Os
algorithm.
Functional Differences Between Version 6.0 or Later and
Versions Earlier Than 6.0
• The description of the HDLM version displayed as a result of executing
HDLM commands or utilities has been changed.
• In versions earlier than 6.0, the messages KAPL09210-I, KAPL09211-I,
and KAPL09212-E will not be output when you install HDLM. In versions
6.0 or later, one of the above messages will be output when you install
HDLM.
• In a new installation of HDLM, the default value for the automatic failback
function has been changed from off to on.
#
) to process-specific-trace (traces for multiple processes)
Functional Differences Between Versions of HDLM
Hitachi Dynamic Link Manager User Guide (for Linux(R))
#
).
C-3