Hitachi XP P9500 User Manual page 607

proc
/dev/sddlmaa3
#
Example when the boot loader is grub and LVM is used:
# cat /etc/fstab
/dev/VolGroup00/LogVol00 /
/dev/VolGroup00/LogVol02 /tmp
/dev/VolGroup00/LogVol04 /usr
/dev/VolGroup00/LogVol03 /opt
/dev/sda1
/dev/sddlmaa1
tmpfs
devpts
sysfs
proc
/dev/VolGroup00/LogVol01 swap
#
2 Add a parameter to the boot loader configuration file.
.
The configuration file of the currently used boot loader contains an entry
required to use HDLM as the boot disk. In this entry, add root=device as
a kernel parameter.
For device, enter the device you determined in step 1.
In each of the following examples, the underlined part indicates the
kernel parameter added in this step:
Example when the boot loader is elilo and LVM is not used:
image=vmlinuz-2.6.18-92.el5
label=linux-HDLM
initrd=initrd-2.6.18-92.el5.img.hdlm
read-only
append="console=ttyS0,19200 rhgb quiet root=/dev/
sddlmaa2"
Example when the boot loader is grub and LVM is used:
title Red Hat Enterprise Linux Server (2.6.18-92.el5-HDLM)
root (hd0,0)
kernel /vmlinuz-2.6.18-92.el5 ro rhgb quiet root=/dev/
VolGroup00/LogVol00
initrd /initrd-2.6.18-92.el5.img.hdlm
3 Install other products that use the weak-modules script.
.
Troubleshooting Products That Use the Weak-Modules Script
Hitachi Dynamic Link Manager User Guide (for Linux(R))
/proc proc
swap swap
ext3
ext3
ext3
ext3
/boot ext3
/boot ext3
/dev/shm tmpfs
/dev/pts devpts
/sys sysfs
/proc proc
swap
:
:
:
:
:
:
:
:
defaults 0 0
defaults 0 0
defaults 1 1
defaults 1 2
defaults 1 2
defaults 1 2
defaults 1 2
defaults 1 2
defaults 0 0
gid=5,mode=620 0 0
defaults 0 0
defaults 0 0
defaults 0 0
B-3