Hitachi XP P9500 User Manual page 585

Message ID
KAPL13514-W Usage: /opt/
DynamicLinkManager/bin/
dlmupdatesysinit
KAPL13515-E A command required by HDLM
not found. Command = aa...aa
KAPL13516-E A file required by HDLM not
found. File name = aa...aa
KAPL13517-E A directory required by HDLM
not found. Directory name =
aa...aa
KAPL13518-E A system file is invalid. File
name = aa...aa
Hitachi Dynamic Link Manager User Guide (for Linux(R))
Message Text
Messages
Explanation
Check for parameters, and then
re-execute the dlmupdatesysinit
utility. Refer to dlmupdatesysinit
Utility for Updating System Scripts
on page 7-39.
Action
Check for parameters, and then
re-execute the dlmupdatesysinit
utility. Refer to dlmupdatesysinit
Utility for Updating System Scripts
on page 7-39.
Details
aa...aa: File name of command
Action
Install a package that includes the
command indicated in the
message. Next, execute the
dlmupdatesysinit utility. Refer to
dlmupdatesysinit Utility for
Updating System Scripts on page
7-39.
Details
aa...aa: file name
Action
Check for and, if necessary,
restore the file indicated in the
message. Next, execute the
dlmupdatesysinit utility. Refer to
dlmupdatesysinit Utility for
Updating System Scripts on page
7-39.
Details
aa...aa: directory name
Action
Check for and, if necessary,
restore the directory indicated in
the message. Next, execute the
dlmupdatesysinit utility. Refer to
dlmupdatesysinit Utility for
Updating System Scripts on page
7-39.
Details
aa...aa: Name of the file where an
error was detected
Action
Check for and, if necessary,
restore the system file indicated in
the message. Next, execute the
dlmupdatesysinit utility. Refer to
8-125