Hitachi XP P9500 User Manual page 575

Message ID Message Text
KAPL12558-I Please restart the computer
so that the option settings
take effect.
KAPL12559-E An invalid value was
specified in the parameter.
Option = aa...aa, Parameter
= bb...bb
KAPL12560-E An option is not specified.
KAPL12561-E An invalid option was
specified. Option = aa...aa
KAPL12562-E A necessary file or directory
was not found. File or
directory name = aa...aa
KAPL12563-E An attempt to create a
directory has failed.
Directory = aa...aa
Hitachi Dynamic Link Manager User Guide (for Linux(R))
Action
Restart the computer.
Details
aa...aa: Option
bb...bb: Specified
parameter(Maximum 10 characters.
If there are more than 10 characters,
only 10 characters will be output
followed by ...)
Action
Refer to
HDLM Driver Options on page
and then specifying the correct
argument. Then, re-execute the
dlmsetopt utility.
Action
Refer to
HDLM Driver Options on page
specify the correct argument, and
then re-execute the dlmsetopt
utility.
Details
aa...aa: Option
Action
Refer to
HDLM Driver Options on page
specify the correct argument, and
then re-execute the dlmsetopt
utility.
Details
aa...aa: Referenced directory or file
name
Action
Make sure that the directory or file
indicated in the message has not
been renamed. If the directory or file
has been renamed, change the name
back to its original name, and then
re-execute the utility for setting
HDLM driver option (dlmsetopt).
Details
aa...aa: Directory that an attempt
was made to create
Action
Make sure there is enough free disk
capacity, and then re-execute the
Messages
Explanation
dlmsetopt Utility for Setting
7-35,
dlmsetopt Utility for Setting
7-35,
dlmsetopt Utility for Setting
7-35,
8-115