Hitachi XP P9500 User Manual page 571

Message ID Message Text
KAPL12332-E The root partition could not
be found in the file. File
name = aa...aa
KAPL12333-E An HBA that HDLM can
support as a boot disk was
not found in the file. File
name = aa...aa
Hitachi Dynamic Link Manager User Guide (for Linux(R))
Action
Perform the dlmmkinitrd utility again
after performing the following check:
a
.
b
.
If the problem is not solved, execute
the DLMgetras utility for collecting
HDLM error information, and then
contact your HDLM vendor or the
maintenance company if there is a
maintenance contract for HDLM.
For details on the DLMgetras utility,
see
HDLM Error Information on page
Details
aa...aa: The name of the file
referenced by the dlmmkinitrd utility
for supporting the boot disk
Action
Confirm that the settings of the root
partition are in the /etc/fstab file.
Confirm that the root partition is
mounted.
Details
aa...aa: The name of the file
referenced by the dlmmkinitrd utility
for supporting the boot disk
Action
Make sure that an HBA driver that
can be used when the boot disk is an
HDLM device is in the following file:
¢
¢
Messages
Explanation
Confirm that the kernel of the
version displayed into the
message is installed.
In Red Hat Enterprise Linux,
confirm the kernel version
specified as a parameter.
For the details of the parameter,
see dlmmkinitrd Utility for
Supporting a Boot Disk on page
7-31.
DLMgetras Utility for Collecting
When Red Hat Enterprise Linux
AS4/ES4 or Red Hat Enterprise
Linux 5 is used:
/etc/modprobe.conf
When SUSE LINUX Enterprise
Server 10 or SUSE LINUX
Enterprise Server 11 is used:
The line of INITRD_MODULES= of
a /etc/sysconfig/kernel file
7-3.
8-111