Hitachi XP P9500 User Manual page 565

Message ID Message Text
KAPL12305-I The utility for supporting the
boot disk was stopped by the
user.
KAPL12306-I The list of files required in
the initial ramdisk image is
being created.
KAPL12307-I The initial ramdisk file
system is being created.
KAPL12308-I The initial ramdisk file
system is being mounted.
Mount point = aa...aa
KAPL12309-I Required files are being
copied to the initial ramdisk.
KAPL12310-I The linuxrc executable is
being created.
KAPL12311-I The fstab file for the initial
ramdisk is being created.
KAPL12312-I The directories for the initial
ramdisk are being created.
Hitachi Dynamic Link Manager User Guide (for Linux(R))
¢
¢
¢
¢
¢
If the file name displayed in the
message is another file name
Action
Retry the dlmmkinitrd utility for
supporting the boot disk.
Action
None.
Action
None.
Details
aa...aa: Mount point to be used
Action
None.
Action
None.
Action
None.
Action
None.
Action
None.
Messages
Explanation
/etc/opt/DynamicLinkManager/
dlmmkinitrd.conf
/lib/modules/kernel-version/
kernel/drivers/
DynamicLinkManager/
sddlmfdrv.o
/lib/modules/kernel-version/
kernel/drivers/
DynamicLinkManager/
sddlmfdrv.ko
/lib/modules/kernel-version/
kernel/drivers/
DynamicLinkManager/
sddlmadrv.o
/lib/modules/kernel-version/
kernel/drivers/
DynamicLinkManager/
sddlmadrv.ko
The OS (kernel) or the HBA
driver may not be installed
correctly. Confirm sure the
existence of the files.
8-105