Hitachi XP P9500 User Manual page 556

Message ID
KAPL10653-W The entered value is invalid.
KAPL10665-I
KAPL10920-W Processing for HDLM Config
KAPL10922-E
KAPL10923-E
KAPL10934-W A file could not be opened. File
8-96
Message Text
Please re-enter it [y/n]:
The dlmpr utility completed.
Manager interrupted. Execute
the HDLM-configuration
definition utility (dlmcfgmgr)
again.
The version of the kernel
supported by the installed HDLM
does not match the currently
running kernel version. Install
the HDLM software that
supports this kernel version.
The HDLM file is invalid. File
name = aa...aa. Reinstall the
HDLM software.
name = /etc/opt/
Messages
Hitachi Dynamic Link Manager User Guide (for Linux(R))
Explanation
Details
A value other than y or n has been
entered for a [y/n] request.
Action
Enter y or n.
Details
The dlmpr utility completed
normally.
Action
None. For details on the dlmpr
utility, see dlmpr Utility for
Clearing HDLM Persistent
Reservation on page
Details
Processing of the HDLM-
configuration definition utility
(dlmcfgmgr) was interrupted.
Action
Please re-execute the HDLM-
configuration definition utility
(dlmcfgmgr).
For details on the dlmcfgmgr
utility, see dlmcfgmgr Utility for
Managing the HDLM Configuration
on page 7-22.
Details
The version of the kernel to which
installed HDLM has adjusted and
the kernel that is running now is
not corresponding. There is a
possibility of installing the
package of the kernel after
installing HDLM.
Action
Install HDLM that adjusts to the
kernel that is running now.
Details
A file necessary for processing
HDLM cannot be found.
Alternatively, the content of a file
is invalid.
aa...aa: Name of file where error
was detected.
Action
Reinstall an HDLM.
Details
7-33.