Hitachi XP P9500 User Manual page 550

Message ID
KAPL10357-E
KAPL10358-E
KAPL10359-E
8-90
Message Text
The maximum number of HDLM
device files has been reached.
Maximum number = aa...aa.
Modify the configuration of the
HDLM device to reduce the
number of HDLM devices used,
and then execute the dlmcfgmgr
utility again.
The device name is too long.
Maximum length = aa...aa.
Check that the logical device file
name of the HDLM device is
correct, and then execute the
dlmcfgmgr utility again.
Multiple instances of the HDLM-
configuration definition utility
cannot be executed
concurrently. Wait until the
Messages
Hitachi Dynamic Link Manager User Guide (for Linux(R))
Explanation
Restart the host. If the host does
not recover, execute the
DLMgetras utility for collecting
HDLM error information, and then
contact your HDLM vendor or the
maintenance company if there is a
maintenance contract for HDLM.
For details on the DLMgetras
utility, see DLMgetras Utility for
Collecting HDLM Error Information
on page 7-3.
Details
An attempt to execute the HDLM-
configuration definition utility
(dlmcfgmgr) failed because the
maximum number of logical
device files has been created.
aa...aa: Maximum number of
created logical device files of an
HDLM device (decimal number)
Action
Revise the configuration of the
HDLM device to reduce the
number of HDLM devices used,
and then re-execute the
dlmcfgmgr utility. For details on
the dlmcfgmgr utility, see
dlmcfgmgr Utility for Managing
the HDLM Configuration on page
7-22.
Details
An attempt to execute the HDLM-
configuration definition utility
(dlmcfgmgr) failed because the
name of the logical device file is
too long.
aa...aa: Maximum length of
characters for a logical device file
name (decimal)
Action
Check that the logical device file
name of the HDLM device is
correct, and then re-execute the
dlmcfgmgr utility. For details on
the dlmcfgmgr utility, see
dlmcfgmgr Utility for Managing
the HDLM Configuration on page
7-22.
Details
An attempt to execute dlmcfgmgr
failed because two or more