Hitachi XP P9500 User Manual page 504

Message ID
KAPL08023-I
KAPL08026-E
KAPL08027-E
8-44
Message Text
A path was recovered. PathID =
aa...aa, PathName =
bb...bb.cc...cc.dd...dd.ee...ee,
DNum = ff...ff, HDevName =
gg...gg
An error occurred on all the
paths of the LU. PathID =
aa...aa
A path was excluded from the
items subject to automatic
failback. PathID = aa...aa
Messages
Hitachi Dynamic Link Manager User Guide (for Linux(R))
Explanation
hh...hh: Host device name (same
as HDevName of view -path)
Action
There could be an error in the
path. See What To Do for a Path
Error on page 5-3 and restore the
path displayed in the message to
running status.
Details
aa...aa: Path ID (same as PathID
of view -path) (decimal (base-10)
number)
bb...bb: Host port number (same
as PathName of view -path)
(hexadecimal number)
cc...cc: Bus number (same as
PathName of view -path)
(hexadecimal number)
dd...dd: Target ID (same as
PathName of view -path)
(hexadecimal number)
ee...ee: HLU number (same as
PathName of view -path)
(hexadecimal number)
ff...ff: Device number (same as
DNum of view -path) (decimal
(base-10) number)
gg...gg: Host Dev name (same as
HDevName of view -path)
Action
None.
Details
An error occurred in the last,
remaining path of an LU. (This is
most likely as a result of a
disconnection.)
aa...aa: Path ID (same as PathID
of view -path) (decimal (base-10)
number)
Action
Errors are detected in all the
paths connected to the LUs. See
What To Do for a Path Error on
page 5-3 to make the path shown
in the error message or the paths
connected to the target LU.
Details
A path was excluded from being
subject to automatic failbacks