Hitachi XP P9500 User Manual page 503

Message ID
KAPL08022-E A path error occurred.
ErrorCode = aa...aa, PathID =
bb...bb, PathName =
cc...cc.dd...dd.ee...ee.ff...ff,
DNum = gg...gg, HDevName =
hh...hh
Hitachi Dynamic Link Manager User Guide (for Linux(R))
Message Text
Messages
Explanation
An error occurred in the path. The
error is most likely due to a
disconnected cable.
aa...aa: Path identifier
(hexadecimal number)
bb...bb: Error code (hexadecimal
number)
When a path error is detected
¢
by a path health checking or
the online operation
Displays 0x000F0000 (Fixed).
When a path error is detected
¢
through an I/O error
Displays the OS error code.
cc...cc: 0x00000000 (fixed)
Action
Check the path in which the error
was detected.
Details
A physical or logical error occurred
in the path.
aa...aa: OS error code
(hexadecimal number)
When a path error is detected
¢
by a path health checking or
the online operation
Displays 0x000F0000 (Fixed).
When a path error is detected
¢
through an I/O error
Displays the OS error code.
bb...bb: Path ID (same as PathID
of view -path) (decimal (base-10)
number)
cc...cc: Host port number (same
as PathName of view -path)
(hexadecimal number)
dd...dd: Bus number (same as
PathName of view -path)
(hexadecimal number)
ee...ee: Target ID (same as
PathName of view -path)
(hexadecimal number)
ff...ff: HLU number (same as
PathName of view -path)
(hexadecimal number)
gg...gg: Dev number (same as
DNum of view -path) (decimal
(base-10) number)
8-43