Hitachi XP P9500 User Manual page 494

Message ID
KAPL05011-E
KAPL05014-I
8-34
Message Text
how to execute the DLMgetras
utility.
Could not attach the HDLM
driver (filter component) to Disk
(aa...aa), Partition (bb...bb).
(cc...cc:dd...dd) Execute the
DLMgetras utility to collect error
information, and then contact
your vendor or maintenance
company. Refer to the HDLM
User's Guide for instructions
how to execute the DLMgetras
utility.
The device object (aa...aa) was
registered as the path (bb...bb).
Messages
Hitachi Dynamic Link Manager User Guide (for Linux(R))
Explanation
Execute the utility for setting
HDLM driver option (dlmsetopt)
and increase the number of retries
for allocating memory. For details
on the dlmsetopt utility, see
dlmsetopt Utility for Setting HDLM
Driver Options on page
Increase system memory. Stop
any unnecessary processes. If the
problem is not solved, execute the
DLMgetras utility for collecting
HDLM error information, and then
contact your HDLM vendor or the
maintenance company if there is a
maintenance contract for HDLM.
For details on the DLMgetras
utility, see DLMgetras Utility for
Collecting HDLM Error Information
on page 7-3.
Details
The path corresponding to the
disk aa...aa and partition bb...bb
could not be registered in the core
logic.
aa...aa: Disk sequence number
(decimal number)
bb...bb: Partition number (decimal
number)
cc...cc: Error code (hexadecimal
number)
dd...dd: Filter driver management
table address (hexadecimal
number)
Action
Check whether the HDLM driver
has started normally. If it has not
started or contains an error,
contact your HDLM vendor or the
maintenance company, if there is
a maintenance contract for HDLM,
and report the error and detail
code.
Details
The HDLM filter driver was
successfully attached and
registered as a path.
aa...aa: Address of table for
managing the HDLM filter driver
(hexadecimal number)
bb...bb: Path ID (hexadecimal
number)
Action
7-35.