Hitachi XP P9500 User Manual page 480

Message ID
KAPL01113-E
KAPL01114-W The audit log configuration file
KAPL01115-W The audit log configuration file
KAPL01116-W The audit log configuration file is
8-20
Message Text
The HDLM file is invalid. File
name = aa...aa
does not exist. Restart the
HDLM Manager, and execute the
"dlnkmgr view -sys -audlog"
command and check the setting.
cannot be opened. Execute the
"dlnkmgr view -sys -audlog"
command and check whether a
normal result is displayed.
invalid. Restart the HDLM
Messages
Hitachi Dynamic Link Manager User Guide (for Linux(R))
Explanation
If you did not perform HDLM
configuration, Perform HDLM
configuration.
When performing neither of the
above, or if the same error
continues to occur even after one
of the above procedures is
performed, execute the utility for
collecting HDLM error information
(DLMgetras) to collect the error
information, and then contact
your HDLM vendor or
maintenance company if there is a
maintenance contract for HDLM.
For details on the DLMgetras
utility, see DLMgetras Utility for
Collecting HDLM Error Information
on page 7-3.
Details
A file necessary for processing
HDLM cannot be found.
Alternatively, the content of a file
is invalid.
aa...aa: Name of file where error
was detected.
Action
Reinstall an HDLM.
Details
The audit log configuration file
does not exist.
Action
Restart the HDLM Manager, and
execute the dlnkmgr view -sys
-audlog command, and then
specify the desired setting by
using the dlnkmgr set -audlog
command or the dlnkmgr set -
audfac command as necessary.
Details
The audit log configuration file
cannot be opened.
Action
If the dlnkmgr view -sys -
audlog command does not display
a normal result, contact your
HDLM vendor or maintenance
company if there is a maintenance
contract for HDLM.
Details