Hitachi XP P9500 User Manual page 468

Message ID
KAPL01021-E
KAPL01023-W The last Online path for the
8-8
Message Text
Cannot execute the HDLM
command due to insufficient
memory.
device cannot be placed
Offline(C).
Messages
Hitachi Dynamic Link Manager User Guide (for Linux(R))
Explanation
HDLM operating environment
have not finished.
Action
offline/online operation
¢
Use the view operation of the
HDLM command (dlnkmgr) to
check the settings, and then
retry. For details on the view
operation, see
Information) on page
view operation
¢
Refer to 3 Creating an HDLM
Environment on page
Creating an HDLM
Environment or
the HDLM Operating
Environment on page
and then configure any paths
that exist. If the same
message appears again,
execute the DLMgetras utility
for collecting HDLM error
information, acquire the error
information, and then contact
your HDLM vendor or the
company for which you have
a service contract. For details
on the DLMgetras utility, see
DLMgetras Utility for
Collecting HDLM Error
Information on page
Details
Memory required for HDLM
command processing could not be
allocated.
Action
Stop unnecessary applications,
increase the amount of free
memory, and then re-execute the
HDLM command.
Details
The path specified for the offline
operation cannot be set to
Offline(C) because that is the last,
available path to the LU from the
host.
Action
Use the view operation of the
HDLM command (dlnkmgr) to
check the status of the paths. For
details on the view operation, see
view (Displays
6-28.
3-1.
Reconfiguring
4-21,
7-3.