Dlmcfgmgr Utility For Managing The Hdlm Configuration; Format; Parameters - Hitachi XP P9500 User Manual

dlmcfgmgr Utility for Managing the HDLM Configuration

For management by HDLM, the HDLM-configuration definition utility obtains
the SCSI device information stored by Linux by detecting the information on
the path between the host and storage system to register in HDLM, and then
creates, updates, or deletes the HDLM devices. Also, this utility sets an HDLM
device as a management target or excludes it from being managed.
When an existing device is updated during execution of this utility, the
definition of the HDLM device is inherited.
Whenever you make any changes to the storage system configuration
(adding or deleting an LU or path), LU partitions, or hardware configuration
on the host, restart the host or execute the dlmcfgmgr utility to re-configure
the HDLM devices.
The operation log is obtained while the dlmcfgmgr utility is executed.

Format

/sbin/dlmcfgmgr

Parameters

The following table lists and describes each parameter name and its
functionality:
Table 7-5 Functionality of the Parameters of the dlmcfgmgr Utility
Parameter
-s
-r
-o
-i
-v [-udev]
-u
-logfs
7-22
[-s]
{-r
|-o {logical-device-file-name-of-the-HDLM-device ...|all}
|-i {logical-device-file-name-of-the-HDLM-device ...|all}
|-v [-udev]
|-u {logical-device-file-name-of-the-HDLM-device ...|all}
|-logfs [dlmcfgmgr-utility-log-file-size]}
Executes the dlmcfgmgr utility without displaying the confirmation
message.
Registers the HDLM device path while the host is running.
Excludes a management-target HDLM device from being managed.
Returns an HDLM device, which was excluded from being managed by
HDLM, to being a management-target HDLM device.
Displays the management status and configuration information of all the
HDLM devices recognized by HDLM.
Deletes the paths displayed as hyphens (-) in the Device column of the
HDLM device configuration information that is displayed by specifying the
-v parameter.
Changes the size of the dlmcfgmgr utility log file (dlmcfgmgr[1-2].log).
Utility Reference
Hitachi Dynamic Link Manager User Guide (for Linux(R))
Functionality