Hitachi XP P9500 User Manual page 393

For details about the information about product IDs, see
Product ID displayed by the view -path operation on page
-srt {lu|cp}
Use this parameter to sort the path information in ascending order,
according to the specified sorting key.
The sorting keys are as follows: the first sorting key is the name of
the storage system (DskName), the second sorting key is the value
specified by the -srt parameter, and the third sorting key is
AutoPATH_ID.
The available parameter values to specify the second sorting key are:
• lu: LU number of the storage system
• cp: Port number of the CHA
When the -srt parameter is omitted, the path information is listed in
ascending order of AutoPATH_IDs.
-t
Omits the title for each information item.
Example
The following example shows how to abbreviate the display of
information about the paths, ordered by iLU.
Items of Path information
Table 6-12 Path Information on page 6-42
information. The following explains the table headings:
• No summary displayed: The user specifies only the -path parameter or
the -path -item parameter.
• Summary displayed: The user specifies the -path -c parameter.
Hitachi Dynamic Link Manager User Guide (for Linux(R))
describes the displayed path
Command Reference
Table 6-14
6-46.
6-41