Hitachi XP P9500 User Manual page 378

-category [[ss] [a] [ca]|all]
ss
a
ca
all
-audfac facility-value
Specifies the audit log facility.
Table 6-9 Values of the Audit Log Facility on page 6-26
values of the audit log facility. The default is user.
user or 1
local0 or 16
local1 or 17
local2 or 18
local3 or 19
local4 or 20
local5 or 21
local6 or 22
local7 or 23
-lbpathusetimes number-of-path-use-times
Specifies the number of times the same path can be used for I/O
operations when the Round Robin (rr), Least I/Os (lio), or Least Blocks
(lbk) algorithm is used for load balancing.
You can specify a decimal (base 10) value from 0 to 999999. The default
is 32.
If you specify 0, operation is the same as when load balancing is disabled.
6-26
Specifies the categories of audit log data to be collected.
Values Indicating Audit Log Data Categories on page 6-26
the values that indicate categories of audit log data. The default is
all. If you specify the -category parameter without specifying a
value, all is assumed.
Table 6-8 Values Indicating Audit Log Data Categories
Value
Audit log events of the StartStop category are collected.
Audit log events of the Authentication category are collected.
Audit log events of the ConfigurationAccess category are
collected.
Audit log events of the StartStop, Authentication, and
ConfigurationAccess categories are collected.
Table 6-9 Values of the Audit Log Facility
Value Corresponding facility value in the /etc/syslog.conf file
user
local0
local1
local2
local3
local4
local5
local6
local7
Command Reference
Hitachi Dynamic Link Manager User Guide (for Linux(R))
Explanation
describes the
Table 6-8
describes