Hitachi XP P9500 User Manual page 377

The following example shows how to update the license key when
the license key file exists:
# /opt/DynamicLinkManager/bin/dlnkmgr set -lic
KAPL01049-I Would you like to execute the operation?
Operation name = set [y/n]: y
KAPL01071-I A permanent license was installed.
#
Example 2
The following example shows how to update the license key when
the license key file does not exist:
# /opt/DynamicLinkManager/bin/dlnkmgr set -lic
KAPL01049-I Would you like to execute the operation?
Operation name = set [y/n]: y
KAPL01083-I There is no license key file. File name =/var/
tmp/hdlm_license
KAPL01068-I Enter a license key:*************
KAPL01071-I A permanent license was installed.
#
-audlog {on [-audlv audit-log-data-collection-level] [-category
[[ss] [a] [ca]|all]]|off}
Specifies whether to collect audit log data.
on: Audit Log data is collected.
off: Audit Log data is not collected.
-audlv audit-log-data-collection-level
Specifies the severity level of audit log data to be collected.
Values Indicating Audit Log Data Collection Levels on page 6-25
describes the values that indicate audit log data collection levels. The
default is 6.
Table 6-7 Values Indicating Audit Log Data Collection Levels
Value (severity)
0
1
2
3
4
5
6
7
Hitachi Dynamic Link Manager User Guide (for Linux(R))
No audit log data is collected.
Critical-level audit log data is collected.
Critical-level and Error-level audit log data is collected.
Critical-level, Error-level, and Warning-level audit log data is
collected.
Critical-level, Error-level, Warning-level, and Informational-level
audit log data is collected.
Command Reference
Explanation
Table 6-7
6-25