To Display The Format Of The Offline Operation - Hitachi XP P9500 User Manual

To Display the Format of the Offline Operation

-help
Displays the format of the offline operation.
Example
Reference
Using the view operation together with standard UNIX commands enables
you to filter the path information listed for a specific HBA port or CHA port.
For details about the view operation, see
6-28.
We recommend that you use the following command and verify the
information on the target paths before you execute the offline operation to
place offline all the paths connected to a specific HBA port or CHA port.
Example 1
The following example shows how to filter and display the information on
all paths that pass through the HBA port whose host port number is 0004
and bus number is 0000:
# /opt/DynamicLinkManager/bin/dlnkmgr view -path | grep 0004.0000
The above command will display information on all the paths that pass
through the specified HBA port.
Example 2
The following example shows how to filter and display the information on
all the paths that pass through the CHA port 0A of the Thunder 9500V
series:
KAPL01061-I 1 path(s) were successfully placed Offline(C); 0
path(s) were not. Operation name = offline
#
The following example shows how to display the format of the
offline operation:
# /opt/DynamicLinkManager/bin/dlnkmgr offline -help
offline:
Format
dlnkmgr offline [-path] -hba HBAPortNumber.BusNumber [-s]
dlnkmgr offline [-path] -cha -pathid AutoPATH_ID [-s]
dlnkmgr offline [-path] -pathid AutoPATH_ID [-s]
dlnkmgr offline [-path] -device SCSI_Device_Name [-s]
Valid value
AutoPATH_ID
KAPL01001-I The HDLM command completed normally. Operation
name = offline, completion time = yyyy/mm/dd hh:mm:ss
#
Command Reference
Hitachi Dynamic Link Manager User Guide (for Linux(R))
{ 000000 - 999999 }(Decimal)
view (Displays Information) on page
6-9