Hitachi XP P9500 User Manual page 325

Command suite for linux(r)

Hide thumbs Also See for XP P9500:

Table of Contents

For example, to place in Offline (C) status the path that goes through the

HBA with host port number 0001 and bus number 0000, execute the

following command:

# /opt/DynamicLinkManager/bin/dlnkmgr offline -hba 0001.0000

While the path that goes through the HBA with host port number 0001 is

placed Offline, the status of the path that goes through the HBA with host

port number 0002 is Online.

Figure 4-3 When the Status of the Path That Goes Through the

Replace the fiber cable for the path that has been placed in Offline(C)

In this example, replace the fiber cable connected to the HBA with host

port number 0001.

Place in Online status the path that goes through the replaced fiber cable

(that is, the path that goes through the HBA connected to the fiber

For example, to place in Online status the path that goes through the HBA

with host port number 0001 and bus number 0000, execute the following

# /opt/DynamicLinkManager/bin/dlnkmgr online -hba 0001.0000

Check the path information.

Hitachi Dynamic Link Manager User Guide (for Linux(R))

Fiber Cable to Be Replaced Is Offline(C)

HDLM Operation

Troubleshooting

Dynamic link manager