Hitachi XP P9500 User Manual page 242

8 Execute the VG scan.
.
To re-create the volume group on the HDLM device, execute the vgscan
command as shown in the following example:
# vgscan
Reading all physical volumes.
Found exported volume group "vg01" using metadata type lvm2
9 Import the volume group.
.
In the following example, the command imports the vg01 volume group:
# vgimport vg01
Volume group "vg01" successfully imported
10 Execute the pvscan command to check that the environment has been
.
changed successfully.
3-174
Figure 3-31 Example of Editing the /etc/lvm/lvm.conf File
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Linux(R))
This may take a while...