Hitachi XP P9500 User Manual page 237

When you use the parted command to change the partition, to let the
system recognize the partitions on the HDLM device, execute the
blockdev command after the parted command.
3 Edit the /etc/lvm/lvm.conf file.
.
Edit the device section in the file as shown below to disable the SCSI
device configuration and enable the HDLM device configuration:
Adding and deleting filter entry information
¢
Add the following line and comment out all other filter entry
information:
filter = [ "a|sddlm[a-p][a-p].*|", "r|/dev/sd|" ]
Adding types entry information
¢
Add the following line:
types = [ "sddlmfdrv", 16 ]
Make sure that types=[ "fd", 16 ] was commented out.
Figure 3-29 Example of Editing the /etc/lvm/lvm.conf File on page 3-170
shows an example of editing the file when the OS is SUSE LINUX
Enterprise Server 9. The shaded section shows the portion to be edited.
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Linux(R))
3-169