Hitachi XP P9500 User Manual page 210

21 Perform an upgrade installation of HDLM.
.
To perform an upgrade installation of HDLM, see
Installation of HDLM on page
HDLM device. You will also need to perform step 13 if you are only
restarting the host. Note that the procedure differs depending on whether
the host is restarted after installation.
22 Execute the dlmcfgmgr utility with the -v parameter specified to check
.
the correspondence between the HDLM device and the SCSI device.
# dlmcfgmgr -v
HDevName
/dev/sddlmaa
KAPL10302-I /sbin/dlmcfgmgr completed normally.
3-142
Management
configured
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Linux(R))
Performing an Upgrade
3-91, perform steps 2 to 12 to create an
Device Host
/dev/sda 0
Channel Target Lun
0 0 0