Hitachi XP P9500 User Manual page 179

When GRUB is used as the boot loader with non-Xen kernels:
¢
For details on kernels supported by HDLM, see
Supported by HDLM on page
:
:
title Red Hat Enterprise Linu Linux (2.6.18-194.el5)
root (hd0,0)
kernel /vmlinuz-2.6.18-194.el5 ro option root=LABEL=/
option
initrd /initrd-2.6.18-194.el5
When LILO or ELILO is used as the boot loader:
¢
:
:
image=/boot/vmlinuz-2.6.18-194.el5
label=linux
initrd=/boot/initrd-2.6.18-194.el5
read-only
append="option root=LABEL=/ option"
12 Change the name of the configuration contained in the boot loader
.
configuration file.
Change the name of the configuration that you copied in step 11. You can
assign any name that indicates that the configuration is used for
specifying the SCSI device.
When GRUB is used as the boot loader:
¢
Change the underlined text as follows:
Before:
title Red Hat Enterprise Linux (2.6.18-194.el5)
After:
title sd-Red Hat Enterprise Linux (2.6.18-194.el5)
When LILO or ELILO is used as the boot loader:
¢
Change the underlined text as follows:
Before:
label=linux
After:
label=linux-sd
13 Change the specification for root contained in the boot loader
.
configuration file from LABEL to the SCSI device, based on the LABEL and
SCSI device correspondence checked in step 5.
Change the specification for root contained in the configuration that you
copied in step 11.
If any options have been specified to suit the user environment, take care
not to delete those options.
When GRUB is used as the boot loader:
¢
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Linux(R))
Hosts and OSs
3-3.
3-111