Hitachi XP P9500 User Manual page 156

Execute installux.sh or the HDLM installation utility (installhdlm)
stored on the HDLM DVD-ROM to check the version of HDLM that will be
installed.
The following example shows how to execute the command when the
mount point for the DVD-ROM is /media/cdrom:
¢
¢
A command execution example is described below. x.x.x-xx is the version
of HDLM.
KAPL09177-I HDLM version: x.x.x-xx
5 Perform the installation.
.
Execute installux.sh or the installhdlm utility stored on the HDLM
DVD-ROM to start installation.
The following shows an installation execution example for when the DVD-
ROM mount point is /media/cdrom.
¢
¢
6 The KAPL09093-I message is displayed to confirm that you want to
.
perform an upgrade installation. Check the HDLM version, and if it is
correct, enter y.
7 Make sure that HDLM is installed.
.
Execute the following command to display detailed information about the
installed package.
# rpm -qi HDLM
Name
Version
Release
If HDLM Version is x.x.x.x.xxx, the installed version of HDLM is correct.
x.x.x.x.xxx indicates the HDLM version that was installed.
8 When you want to set the HDLM driver options, run the dlmsetopt utility
.
for setting HDLM driver option.
3-88
When executing installux.sh
# /media/cdrom/installux.sh -v
When executing the installhdlm utility
# /media/cdrom/HDLM_Linux/installhdlm -v
When executing installux.sh
# /media/cdrom/installux.sh
When executing the installhdlm utility
# /media/cdrom/HDLM_Linux/installhdlm
: HDLM
: x.x.x.x.xxx
: xx
:
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Linux(R))