Error Handling - Kyocera ecosys M2735DW Operation Manual

Setup and Registration (System Menu) > System Menu

Error Handling

[System Menu/Counter] key > [Common Settings] > [Error Handling]
Select whether to cancel or continue the job when error has occurred.
Item
Duplexing Error
Paper Mismatch Error
Measurement
[System Menu/Counter] key > [Common Settings] > [Measurement]
Item
Measurement
Low Toner Alert
[System Menu/Counter] key > [Common Settings] > [Low Toner Alert]
Item
Low Toner Alert
Set what to do when duplex printing is not possible for the selected paper sizes and media
types.
Value
1-sided: Printed in 1-sided
Display Error: Message to cancel printing is displayed.
Set what to do when the selected paper size or type does not match paper size or type loaded
in the specified paper source while printing from the computer by specifying the cassette or
multipurpose tray.
Value
Ignore: The setting is ignored and the job is printed.
Display Error: Message to cancel printing is displayed.
Select metric or inch for the unit for paper dimensions.
Value: mm, inch
Set the amount of remaining toner to notify the administrator when to order a toner when the
toner is running low.
This notification is used for event report, Status Monitor, SNMP Trap.
Value: Off, On
NOTE
If [On] is selected, set the amount of remaining toner to alert. The setting range is 5 to 100% (in
1% increments).
8-18
Description
Description
Description