Background Density Adjustment - Kyocera 1102H03NL0 Advanced Operation Manual

Sending Functions

Background Density Adjustment

2-24
Lightens the background of the colored original when it is too dark.
NOTE:
You cannot adjust the background density if you selected
[Monochrome] in Color Selection (see page 2-25).
Use the procedure below to set the background density when sending
scanned images.
1 Place the originals on the platen.
2 Press the Send key.
3
Press [Color/Image] and then [Background Density Adj.].
4
Press [On], and
press [1] to [5]
(Lighter- Darker) to
adjust the density.
5
Press [OK].
6 Specify the destination, and press the Start key to start sending.
Ready to send.
Place original .
Background Density Adj.
Background
Off
Lighter
On
Press [OK] to display
the image.
Add Shortcut
Status
ADVANCED OPERATION GUIDE
Destination
1
Darker
1 2 3 4 5
Cancel OK
10/10/2007 10 :10