Continuous Scan; Auto Image Rotation - Kyocera Taskalfa Pro 15000c Operation Manual

Using Various Functions > About Functions

Continuous Scan

Advanced
Copy
Setup
Scans a large number of originals in separate batches and then produce as one job.
Originals will be scanned continuously until you select [Finish Scan].
Select [On] to use continuous scanning. To use Job Build, select [Job Build]. You can set the functions that appear on
the screen during scanning.
(Value: [Off] / [On] / [Job Build])
Job Build
When [Job Build] is selected when copying or printing, the binding orientation for finished documents can be selected
from [Binding Left], [Binding Right] or [Binding Top].
The following functions can be selected during scanning.
Item
Scan next copy page
Next Copy: On Back
Next Copy: On Front
Sheet Insertion

Auto Image Rotation

Advanced
Copy
Setup
Automatically rotates the image 90 degrees when the sizes of the original and the loaded paper matches but the
orientations are different.
(Value: [Off] / [On])
NOTE
• You can select whether to rotate the image automatically in the default settings.
Auto Image Rotation (Copy) (page 15-36)
• When you have enabled this function, you can select how the images are rotated.
Auto Image Rotation Action (page 15-36)
Advanced
Send
Setup
1 11
1~10 11~20
Select this to copy another page.
In duplex copying, prints on the back side if the next page is to be printed on the front
side. Select [Next Copy: On Back] to use this function.
In duplex copying, prints on the front side if the next page is to be printed on the back
side. Select [Next Copy: On Front] to use this function.
Inserts a blank paper in the next page. Select [Sheet Insertion] to use this function.
Functions
Custom
Box
21 1
21~30 1~30
Description
13-44
Functions
USB
Memory