Select Label And Black Mark Control Function(S) - Epson TM-T88III Programming Manual

C O N F I D E N T I A L
FS ( L
[Name]

Select label and black mark control function(s)

[Printers not featuring this command] TM-J2000/J2100, TM-T90, TM-T88III, TM-L60II, TM-P60, TM-U210,
[Description] Various processes are performed on label or black mark paper.
• Function code (
fn
48
65
66
67
•
[Notes]
The functions of this command are determined by the (
according to function.
When using label paper (die-cut label), use Functions 65 and 67.
When using black mark paper, use Functions 66 and 67.
When origin of layout is set to "paper layout is not used," Functions 65, 66, and 67 do not operate.
The position information of Function 48 is useful information when the origin of layout is set to "bottom
of a label" or "top of a black mark."
Set the origin of layout (paper layout is not used / bottom of a label / top of a black mark) using
Function 49 of GS ( E of the paper layout.
Paper roll Printing paper commands
Printing paper commands
TM-U300A/B
TM-U220, TM-U230
fn
) specifies the function.
Function No. Function name
Function 48 Transmit the positioning information
Function 65 Feed paper to the label peeling position
Function 66 Feed paper to the cutting position
Function 67 Feed paper to the print starting position
× 256) as the number of bytes after
p p p p
, specifies ( +
L H L H
[parameters]
Description of the is described in each function.
fn
FS ( L
p fn [parameters]
( and
H
) setting. The actual command operation varies
E
XECUTING COMMAND
).
Ver. 10.01 p. 646