Epson TM-T88III Programming Manual page 381

C O N F I D E N T I A L
[Model-dependent variations]
PRINT #1, CHR$(&H10);CHR$(&H5);CHR$(2);
TM-J2000/J2100
BUSY condition for a parallel interface is selected by DIP switch 1-3.
TM-T90
BUSY condition for a parallel interface is selected by DIP switch 1-3.
TM-L90
BUSY condition for a parallel interface is selected by DIP switch 1-3.
The setting of [Msw8-2] affects the recovery operation from the paper layout error.
See function 3 of GS FF for memory switch details.
[Msw8-2] Recovery operation from error
OFF Can recover from the error by opening/closing the printer
cover in addition to by executing DLE ENQ. When the
printer recovers from the error, paper layout is measured
automatically and paper is fed to the label print starting
position and the paper layout stored in the non-volatile
memory is rewritten.
ON Can recoer by executing DLE ENQ. When the printer
recovers from the error, paper is fed to the label print
starting position. Change the setting of the paper layout
stored in the non-volatile memory so that it matches the
currently used paper layout. See function 49 of this
command for setting the paper layout.
Paper roll Miscellaneous commands
TM-J2000/J2100, TM-T90, TM-L90, TM-T88III, TM-U230, TM-U220, TM-U210.
Program Example for all printers
DLE ENQ Ver. 10.01 p. 381