Epson TM-T88III Programming Manual page 469

C O N F I D E N T I A L
Printer model: TM-U220
• Model dependent printer information (
n
= 112) send status of DIP switch as follows.
Send data is 4 bytes data group composed of [header + printer information (2 bytes) + NUL].
• Type information (n = 33)
Bit 1: [Autocutter is installed/not installed] indicates the state of DIP switch 2-2.
Bit 2: The bit [DM-D (Customer display) isn't supported.
• Font of Language for each country (
n
= 69)
Simplified Chinese model send the state of Memory switch [MSW 2-3].
Paper roll Miscellaneous commands GS I Ver. 10.01 p. 469